|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Douglas T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Friday June 20, 2008,
05:20 am ET
Douglas, Wyoming, Jun. 20 /Aaron Bashorun/ --
The way business connect to the digital universe is changing. More and more enterprises are
discovering the new broadband options made available to them through a series of cost cutting
measures by telecommunication providers. With the recent rush to consolidate, more and more
features are being crammed into the current service offerings, which continue to fall in price
bringing products like integrated T1 service into the price range of the vast majority of
small to medium-size businesses.
Adoption of new technologies take time, and dynamic integrated T1 service is no
different. Since the telephone service is regarded more as a utility than anything,
business pay very little attention to changes in the industry. Significant price
reductions and incentive packages need to be placed on their doorstep by proactive
consultants and telecom salespeople in order to grab their attention. However, once
the new technology begins becoming commonplace in the industry, momentum builds
and soon the new products become standard. Businesses soon see themselves at a
disadvantage to their piers if they don't adapt and keep up.
At $50 to $75 per month, the average small business telephone customer could expect to pay
up to $750 for just 10 regular phone lines, which come with only a standard set of features
such as Voicemail, Caller ID, and Three-way calling. From 2000 to 2005, the cost of a
dynamic integrated T1 line was well over $800, making it an unattractive option from a
pure cost point of view. However, that paradigm has changed with the introduction of
sub-$400/month price plans and features that make the old POTs lines look pre-historic.
With any new advancement in technology there is usually a lag in the time it take
users known as "early adapters" to try out and begin using the new services themselves.
Although dynamic T1 service has been available in many US markets since 2005, it's
just now that we have observed people beginning to embrace the new technology. One
such business that recently changed from a voice PRI and data T1 line on to one,
dynamic T1 line is Jason Oliver, a small business owner in Los Angeles, California.
"When I found out that I could replace my two T1's with one single dynamic integrated
circuit (offered by TelePacific Communications), I had two thoughts: 1- where do I
sign, and 2- why didn't someone tell me about this sooner!"
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
"When we moved into our new location here in Los Angeles" commented John Baker, a
small business owner in San Diego, California, "we feared having to sign up for
commercial telephone and internet service. Until about a year ago, the services
being offered to us were TDM, which doesn't come cheap. Thankfully our Telarus
commercial telecom broker recommended that we give TelePacific a try, and we did.
One year later, we've never had an erroneous bill, our phone and data are all on
one single dynamic T1, and we can focus on what we do best - brokering mortgages."
With the help of super-CLECs like XO Communications, PAETEC, Nuvox, One Communications,
Cavalier Telephone, and TelePacific, small business owners everywhere now have access
to non-Bell service that is on par or better than those being offered by the former
Bells. Integrated T1s that do more and cost less have transformed into a solid beach
head for the newcomers. Expect innovation to continue on its upward spiral as the CLECs continue to expand
their footprints as well as their customer bases. Barring any funny stuff from the FCC,
the CLECs will be here to stay. Sorry Ma Bell.
|