|
Courtesy of ShopforT1.com
Definition 1. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 4. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Bruceton Mills T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
|
Thursday September 04, 2008,
08:05 pm ET
Bruceton Mills, West Virginia, Sep. 04 /Jerome Jones/ --
Small businesses all over the country are discovering a whole new universe of broadband access.
As the price of commercial-grade telecommunication services continues to drop, more and more
enterprises are starting to drop their plain old telephone service lines in favor of all-digital
T1 trunks that deliver voice and data over the same connection. These new enhancements were
made possible by the increasing pace of consolidation in the telecommunication industry along
with the increasing value bigger phone companies can provide.
Adoption of new technologies take time, and dynamic integrated T1 service is no
different. Since the telephone service is regarded more as a utility than anything,
business pay very little attention to changes in the industry. Significant price
reductions and incentive packages need to be placed on their doorstep by proactive
consultants and telecom salespeople in order to grab their attention. However, once
the new technology begins becoming commonplace in the industry, momentum builds
and soon the new products become standard. Businesses soon see themselves at a
disadvantage to their piers if they don't adapt and keep up.
When asked about his recent decision to replace his TDM channelized T1 with a
SIP-enabled dynamic T1, Robert Probst, small business owner in San Diego, explained
that "it was really an easy decision to make. My business was growing and I couldn't
afford the cost of more voice trunks. When I learned that it was possible to
have up to 16 voice lines, and a full data T1 of high speed Internet bandwidth,
all on the same line, for under $500 - I was sold. I ended up expanding the
telecom capability of my business, improving the quality of my Internet connection,
and saved money while doing it."
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
At $50 to $75 per month, the average small business telephone customer could expect to pay
up to $750 for just 10 regular phone lines, which come with only a standard set of features
such as Voicemail, Caller ID, and Three-way calling. From 2000 to 2005, the cost of a
dynamic integrated T1 line was well over $800, making it an unattractive option from a
pure cost point of view. However, that paradigm has changed with the introduction of
sub-$400/month price plans and features that make the old POTs lines look pre-historic.
To illustrate the types of decisions that small business owners are faced with
on a daily basis, we interviewed Glenda Probst, small business owner in Los
Angeles, California, about her recent move to a dynamic integrated T-1.
"I was in a quandary about how to go about expanding the number of voice
lines to my business. Before making the move to a dynamic integrated line,
I was using POTs lines. After the fifth line, my bill was above $300/month,
not including my $100/month DSL connection. Now, I have 12 pure digital
voice lines, 1.5 MB of broadband, and I pay under $400 for it. It was a major
upgrade in service with a reduction in total price. I only wish I'd learned
about this product sooner."
CLECs are continuing to find new and loyal customers in the small business space, but
for how long will this trend continue? Will the RBOCs ever be able to give them a fight
on a level playing field? Only the FCC knows that answer to that question - all we can
do is be thankful for the past 12 years of progress and hope we never return to the
pre-1996 era of Telecommunications. Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits.
|
Welcome to our real-time 
