|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 3. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 4. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Artas T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
|
Thursday May 22, 2008,
06:11 pm ET
Artas, South Dakota, May. 22 /Zackary Smith/ --
For many small to medium size businesses, higher productivity with relation to their broadband
and voice services is just around the corner. Thanks in part to the recent price reduction trend
in the industry, carriers have deemed it necessary to consolidate in order to offer more services
at a lower cost than their rivals. Overlapping networks have been consolidated into leaner, more
feature-rich versions of their previous selves, dramatically lowering the price small businesses
pay for the popular dynamic integrated T-carrier (T-1) lines that combine local voice and
high-speed Internet service into one connection.
Prior to the advent of the "all digital" integrated T-1 in 2005, customers only had
one choice when it came to dedicated service: analog trunks (24 line bundles).
Not only where analog trunks expensive - the average cost ranging from $800 to
$1500 per month depending on the user's geographic proximity to the LECs point
of presence - they could not re-allocate unused voice channels to carry data.
Digital trunks, on the other hand, can reclaim voice lines not in use and put
them to work carrying high-speed data packets. That means users enjoy the full
1.5 Mbps of broadband when they are not on the phone.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
The old-school integrated T-1 was analog in nature, and came with 24 configurable
channels (called a trunk) which could be configured to carry either voice or data
traffic. The new "dynamic" trunks are all-digital and can change on-the-fly
to carry either data or voice traffic. This comes in handy when none of the voice
lines are in use - all channels can revert to carrying data traffic, giving the
end-use a full 1.5 MBPS of broadband. Each phone call requires only 64K of bandwidth,
so even a small handful of calls only slows down the data connection by a nominal
amount.
The adoption of any new telecommunications platform is never instantaneous. Many
technologies, like VoIP for example, have been in the works for years without
gaining much traction. Enterprises see communications as their life blood. Even
though many are becoming aware of newer, cheaper mediums by which they can conduct
business, the risk still outweighs the rewards in their minds. Couple the
'if it isn't broken, why fix it?' mind set with the telecom meltdown of the early
2000's and it isn't surprising that widespread adoption of new telecom services
has lagged. However, the new technologies of IP-based voice systems are finally
starting to gain an audience, and the chorus of satisfied customers continues to
grow. As this momentum pushes forward, so does general acceptance of it viability.
There are two basic "integrated" DS-1 configurations, analog and digital. The 24-line
bundle in which they come is termed a "trunk". The main difference between analog and
digital trunks is their flexibility. With digital trunks, voice lines not in use
can be dynamically reconfigured to carry data traffic, so they don't sit idle.
Analog trunks on the other hand can not change their function once configured
by the service provider. Data channels remain data channels and the same for
voice channels, even if there is no voice traffic.
Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits. Will this train of innovation, lower prices, and services that add value to SMB's continue
to roll down the tracks of progress? It's all up to our government - and which political
party controls the FCC. Without the deregulation act of 1996, we would have never known
just how much the CLECs were capable of.
|
If you would like to get a real-time 
