|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Rosewood T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
|
Tuesday October 14, 2008,
04:45 pm ET
Rosewood, Ohio, Oct. 14 /Dolf Olviederlag/ --
The digital universe, and the way people connect to it, is changing. Small businesses, in
particular, are discovering new high-speed Internet and telecom options that are now
squarely within their budgets. Through a myriad of mergers and acquisitions, telecommunication
providers have greatly enhanced their integrated T1 products with features that businesses
can't live without, all while dropping the price to about half of what they were just
two years ago.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
Ohio is a place that we found was a hot spot for small business owners
making the move over to dynamic T-1 lines. One business owner that we interviewed
gave glowing reviews of his move to TelePacific's "OnePac" dynamic product.
Keith Gray explained "I used to have a regular integrated T1 with 10 voice
lines and 14 data channels. When no one was using the phone in my office,
we were limited to just 896 KB of bandwidth. After searching on the Internet
for better options, I found that I could reduce my price from $850/month to
$500/month, and at the same time have 14 voice lines and 1.5 mbps of broadband.
I didn't take long for me to pull the trigger and make the change."
The Ohio area is one place in particular where the analog to digital
revolution is gaining traction. One business owner we interviewed about
his recent decision to become a digital convert, Peter Anderson, explained
that "my biggest hindrance was my ignorance. Had I known that there was
a solution that would allow me to increase the number of voice lines,
get a full T1 (1.5 MB) of high-speed Internet, all for less than I was paying
for my POTS/DSL configuration, I would have made the move a long time ago."
Many others like Mr. Anderson are coming to the same conclusion.
The Integrated T1 line has two general flavors; analog and, of course, digital.
The term "trunk" is synonymous with an integrated T1 line, representing 24
bundled DS0 (regular 64KB) channels. Digital trunks form the basis technology
for dynamic integrated lines, which are capable of transporting digitized
versions of voice traffic in addition to regular data packets. This ability
of digital trunks to function in the data realm allows it the ability to
dynamically allocate traffic according to the application, allowing priority
for voice traffic and "re-claiming" that bandwidth for data transfer when the
phone call is completed. This ensures that none of the capacity of the
T1 line is ever wasted.
The early adapters of this new technology have realized a cost savings that helps
them be more competitive in the market space. By saving hundreds of dollars each
month, which equates to thousands of dollars per year, small businesses are able
to do more while spending less on their telecom bill. This savings allows for
hiring of additional staff, upgrading equipment, and other activities that make
the enterprise more productive and profitable. Many in the industry see the
lack of mass adoption of this new technology as just shear ignorance and/or
a lack of trust for telecom sales people.
The only thing that can get in the way of future progress is the law. You know, the one
that requires the RBOCs to lease their local loops to CLECs at a reduced rate so that
the customer can get a dedicated connection between their office and the CLECs' network.
If the FCC decided to lift this requirement, this whole deck of cards could come down
in a hurry, and when it does, you can kiss dynamic integrated T1 service for under $500
good bye!
Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits.
|