|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Allensville T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 3. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Thursday June 12, 2008,
04:54 pm ET
Allensville, Kentucky, Jun. 12 /Kim Mankaryous/ --
Is there a resurgence in the popularity of telecommunications providers that compares with
the late 1990's? The answer may surprise you. Since the crash of the Internet bubble,
struggling telecoms have seen Darwin in action as many companies were forced with the
choice of bankruptcy or forced consolidation. However, some companies chose the road less
traveled: innovation. By offering customers more for less, many small to medium size
business customers are finding that they can upgrade to integrated T1 service for the
same cost of five regular phone lines.
There are two basic "integrated" DS-1 configurations, analog and digital. The 24-line
bundle in which they come is termed a "trunk". The main difference between analog and
digital trunks is their flexibility. With digital trunks, voice lines not in use
can be dynamically reconfigured to carry data traffic, so they don't sit idle.
Analog trunks on the other hand can not change their function once configured
by the service provider. Data channels remain data channels and the same for
voice channels, even if there is no voice traffic.
To see how customers are reacting to this new product, we interviewed a series of
small business owners in Kentucky who are currently using the service. One such
individual shared with us his enthusiasm for the enhanced capabilities dynamic
service offers. "When I was first contacted about the dynamic integrated T1,
I was deeply skeptical of what I was hearing. Over the course of my brief
dealings with telephone companies, all I got was less service with more cost.
Now I am happy to say that I am getting more for less, which makes for one
very happy customer."
When asked about his recent decision to replace his TDM channelized T1 with a
SIP-enabled dynamic T1, Robert Probst, small business owner in San Diego, explained
that "it was really an easy decision to make. My business was growing and I couldn't
afford the cost of more voice trunks. When I learned that it was possible to
have up to 16 voice lines, and a full data T1 of high speed Internet bandwidth,
all on the same line, for under $500 - I was sold. I ended up expanding the
telecom capability of my business, improving the quality of my Internet connection,
and saved money while doing it."
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
The Integrated T1 line has two general flavors; analog and, of course, digital.
The term "trunk" is synonymous with an integrated T1 line, representing 24
bundled DS0 (regular 64KB) channels. Digital trunks form the basis technology
for dynamic integrated lines, which are capable of transporting digitized
versions of voice traffic in addition to regular data packets. This ability
of digital trunks to function in the data realm allows it the ability to
dynamically allocate traffic according to the application, allowing priority
for voice traffic and "re-claiming" that bandwidth for data transfer when the
phone call is completed. This ensures that none of the capacity of the
T1 line is ever wasted.
The golden age of telecommunications may be upon us, based upon our research and
recent uptick in customer satisfaction. Although the industry has years of
bad blood to overcome, recent innovations such as the dynamically configuring
T1 line are proof that progress is indeed being made. But how much longer will we continue to see improved technology, services, and prices?
It's all in the hands of the Federal Communications Commission, as they have the power
to sqwash the CLECs by proxy. No wonder AT&T and Verizon are the two biggest lobbying
powers in Washington. It makes you wonder what kind of services they would be able to
offer had they plowed that money into R&D instead of politics.
|
If you would like to get a real-time 
