|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Modena T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Thursday September 25, 2008,
01:16 pm ET
Modena, Illinois, Sep. 25 /Dolf Olviederlag/ --
Higher productivity for small to medium sized businesses is just around the corner thanks
to commercial grade broadband services that are now being delivered at a fraction of their
previous cost. Due to the ever increasing competitive marketplace and a mad dash to consolidate
networks, telecoms are offering their premium business services to small businesses for a fraction
of what they used to cost just a few years ago. Businesses who use more than four regular phone
lines can now upgrade to dynamic integrated T-carrier circuits for the same price.
Min Lieu owns a small insurance agency in Illinois. Five years ago he signed up with
XO Communications for a TDM-based integrated T1 line for $870/month, which did not
include local or long distance calling. Recently, he was offered XO's version of
a dynamic circuit called "XO Flex" for half of the price he was already paying.
"I would have been a fool not to take the deal" stated Mr. Lieu. "I'm able to
add headcount with additional voice lines, without any increase in expense or
degradation in high-speed Internet performance."
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
To illustrate the types of decisions that small business owners are faced with
on a daily basis, we interviewed Glenda Probst, small business owner in Los
Angeles, California, about her recent move to a dynamic integrated T-1.
"I was in a quandary about how to go about expanding the number of voice
lines to my business. Before making the move to a dynamic integrated line,
I was using POTs lines. After the fifth line, my bill was above $300/month,
not including my $100/month DSL connection. Now, I have 12 pure digital
voice lines, 1.5 MB of broadband, and I pay under $400 for it. It was a major
upgrade in service with a reduction in total price. I only wish I'd learned
about this product sooner."
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
There are two basic "integrated" DS-1 configurations, analog and digital. The 24-line
bundle in which they come is termed a "trunk". The main difference between analog and
digital trunks is their flexibility. With digital trunks, voice lines not in use
can be dynamically reconfigured to carry data traffic, so they don't sit idle.
Analog trunks on the other hand can not change their function once configured
by the service provider. Data channels remain data channels and the same for
voice channels, even if there is no voice traffic.
As the competitive local exchange carriers continue to compete by introducing new and
exciting products at prices most small businesses can afford, they are coming up against
increasing resistance from the RBOCs who are forces to lease their own copper lines
to these CLECs at reduced rates. This reality has the CLECs rushing to deploy their
own networks and fiber routes, but the FCC may ultimately relax the mandate - leaving
all of us wondering how long the party is going to last. Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits.
|