|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Bear T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 3. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Monday May 19, 2008,
11:26 pm ET
Bear, Delaware, May. 19 /Kiersten Thomas/ --
Higher productivity for small to medium sized businesses is just around the corner thanks
to commercial grade broadband services that are now being delivered at a fraction of their
previous cost. Due to the ever increasing competitive marketplace and a mad dash to consolidate
networks, telecoms are offering their premium business services to small businesses for a fraction
of what they used to cost just a few years ago. Businesses who use more than four regular phone
lines can now upgrade to dynamic integrated T-carrier circuits for the same price.
To see how customers are reacting to this new product, we interviewed a series of
small business owners in Delaware who are currently using the service. One such
individual shared with us his enthusiasm for the enhanced capabilities dynamic
service offers. "When I was first contacted about the dynamic integrated T1,
I was deeply skeptical of what I was hearing. Over the course of my brief
dealings with telephone companies, all I got was less service with more cost.
Now I am happy to say that I am getting more for less, which makes for one
very happy customer."
One might think that, given the cost - benefit analysis of the integrated T1 value
proposition, more businesses would be changing over to the new platform. However,
the rate of adaptation is rather slow. Rob Butler, head of the Telecommunications
Research Institute, thinks that "phone companies have a problem with trust amongst
their user base. For many years, customers have dealt with increasing rates, long
hold times, and frustration in general. Now, it appears, the ice is finally starting
to melt and customers are opening themselves up to new technology.
Dynamic integrated T1s are a fairly new phenomenon. Unlike their analog
counterparts that can never deviate from their initial set up configurations,
dynamic T1s are able to convert voice phone calls into data packets and
them prioritize their delivery through an all-digital trunk. The ability
to break everything down into the lowest common denominator (digital)
allows the system to change on-the-fly to reclaim phone lines for high
speed Internet the second the phone call is terminated. An integrated T1 essentially
provides the end user the same service as one data T1 line and one
voice T1 line, for half the cost.
The Integrated T1 line has two general flavors; analog and, of course, digital.
The term "trunk" is synonymous with an integrated T1 line, representing 24
bundled DS0 (regular 64KB) channels. Digital trunks form the basis technology
for dynamic integrated lines, which are capable of transporting digitized
versions of voice traffic in addition to regular data packets. This ability
of digital trunks to function in the data realm allows it the ability to
dynamically allocate traffic according to the application, allowing priority
for voice traffic and "re-claiming" that bandwidth for data transfer when the
phone call is completed. This ensures that none of the capacity of the
T1 line is ever wasted.
Is the era of the analog trunk, or bundle of 24 DS-0 (64 kbps) channels,
officially over? Possibly, thanks to the two-for-the-price-of-one features
of a dynamic integrated T1, which can function exactly like a pure 1.5 mbps
data T1 when no one is one the phone, and allocate required bandwidth
for voice traffic when a user initiates a phone call. Likewise, as soon
as the client terminates the voice session, the 64 KB is re-assigned back
to the digital universe. This switch-hitting capability provides all
of the feel and function of a data T1 and voice T1, for a fraction of the price.
Expect innovation to continue on its upward spiral as the CLECs continue to expand
their footprints as well as their customer bases. Barring any funny stuff from the FCC,
the CLECs will be here to stay. Sorry Ma Bell. Evolution has lead to a better, cheaper alternative to TDM services that the Bells were
peddling for decades in a vacuum of competition. Now the industry, lead by the innovation
and great business practices of the CLECs, seems to have turned a corner - leaving the
incumbents playing catchup. Obviously, the main benefactor of all of this competition
is the small to medium size business - a segment of the market that was taken for granted
until today.
|
Welcome to our real-time 
