|
Courtesy of ShopforT1.com
Definition 1. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 4. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Paines Hollow T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
|
Thursday November 13, 2008,
09:52 am ET
Paines Hollow, New York, Nov. 13 /Brendan Luna/ --
Higher productivity for small to medium sized businesses is just around the corner thanks
to commercial grade broadband services that are now being delivered at a fraction of their
previous cost. Due to the ever increasing competitive marketplace and a mad dash to consolidate
networks, telecoms are offering their premium business services to small businesses for a fraction
of what they used to cost just a few years ago. Businesses who use more than four regular phone
lines can now upgrade to dynamic integrated T-carrier circuits for the same price.
One might think that, given the cost - benefit analysis of the integrated T1 value
proposition, more businesses would be changing over to the new platform. However,
the rate of adaptation is rather slow. Rob Butler, head of the Telecommunications
Research Institute, thinks that "phone companies have a problem with trust amongst
their user base. For many years, customers have dealt with increasing rates, long
hold times, and frustration in general. Now, it appears, the ice is finally starting
to melt and customers are opening themselves up to new technology.
"When we moved into our new location here in Los Angeles" commented John Baker, a
small business owner in San Diego, California, "we feared having to sign up for
commercial telephone and internet service. Until about a year ago, the services
being offered to us were TDM, which doesn't come cheap. Thankfully our Telarus
commercial telecom broker recommended that we give TelePacific a try, and we did.
One year later, we've never had an erroneous bill, our phone and data are all on
one single dynamic T1, and we can focus on what we do best - brokering mortgages."
From 1997 to 2007, the average cost of a POTS (plain old telephone service) line from the
Bells has hovered in the $50 - $80 per month price range. During this same time period,
integrated DS1 (digital signal 1) lines - which is the equivalent of 24 standard lines -
have come down in price from $1000 per month to $400. Small to medium size businesses
who have more than 5 phone lines can now actually save money by upgrading their service.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
With any new advancement in technology there is usually a lag in the time it take
users known as "early adapters" to try out and begin using the new services themselves.
Although dynamic T1 service has been available in many US markets since 2005, it's
just now that we have observed people beginning to embrace the new technology. One
such business that recently changed from a voice PRI and data T1 line on to one,
dynamic T1 line is Jason Oliver, a small business owner in Los Angeles, California.
"When I found out that I could replace my two T1's with one single dynamic integrated
circuit (offered by TelePacific Communications), I had two thoughts: 1- where do I
sign, and 2- why didn't someone tell me about this sooner!"
As the competitive local exchange carriers continue to compete by introducing new and
exciting products at prices most small businesses can afford, they are coming up against
increasing resistance from the RBOCs who are forces to lease their own copper lines
to these CLECs at reduced rates. This reality has the CLECs rushing to deploy their
own networks and fiber routes, but the FCC may ultimately relax the mandate - leaving
all of us wondering how long the party is going to last. Change does not happen quickly in an industry as so heavily regulated as Telecommunications.
Recent industry consolidation has provided huge alternatives to the incumbents, who
are now under pressure to keep up with new technologies while charging better prices
to retain and attract new customer bases.
|
If you would like to get a real-time 
