|
Courtesy of ShopforT1.com
Definition 1. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 4. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Baker T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
|
Tuesday August 26, 2008,
05:14 am ET
Baker, Montana, Aug. 26 /Craig Docken/ --
The digital universe, and the way people connect to it, is changing. Small businesses, in
particular, are discovering new high-speed Internet and telecom options that are now
squarely within their budgets. Through a myriad of mergers and acquisitions, telecommunication
providers have greatly enhanced their integrated T1 products with features that businesses
can't live without, all while dropping the price to about half of what they were just
two years ago.
The irony of the new small business communications revolution is that it took so long
to gain traction. The whole idea of reclaiming inactive voice channels for data applications
is not new, and was introduced by many CLEC operators over five years ago. So why did
it take so long for SMB's to adopt the technology and make the change? One might argue
that the Internet bubble burst in 2000 shook many people's confidence in telecommunications,
one of the hardest hit industries. With so many telecoms going out of business, or merging
with other small players just to stay solvent, many customers took the "wait and see"
approach before making the decision to entrust their communications with a company not
associated with Ma Bell. Now that economic Darwinism has taken hold, the remaining companies
are attracting new customers who see the benefits of the new technology without the downside
risk of loosing service or not being able to get through to customer service in the pinch.
At $50 to $75 per month, the average small business telephone customer could expect to pay
up to $750 for just 10 regular phone lines, which come with only a standard set of features
such as Voicemail, Caller ID, and Three-way calling. From 2000 to 2005, the cost of a
dynamic integrated T1 line was well over $800, making it an unattractive option from a
pure cost point of view. However, that paradigm has changed with the introduction of
sub-$400/month price plans and features that make the old POTs lines look pre-historic.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
From 1997 to 2007, the average cost of a POTS (plain old telephone service) line from the
Bells has hovered in the $50 - $80 per month price range. During this same time period,
integrated DS1 (digital signal 1) lines - which is the equivalent of 24 standard lines -
have come down in price from $1000 per month to $400. Small to medium size businesses
who have more than 5 phone lines can now actually save money by upgrading their service.
To see how customers are reacting to this new product, we interviewed a series of
small business owners in Montana who are currently using the service. One such
individual shared with us his enthusiasm for the enhanced capabilities dynamic
service offers. "When I was first contacted about the dynamic integrated T1,
I was deeply skeptical of what I was hearing. Over the course of my brief
dealings with telephone companies, all I got was less service with more cost.
Now I am happy to say that I am getting more for less, which makes for one
very happy customer."
The only thing that can get in the way of future progress is the law. You know, the one
that requires the RBOCs to lease their local loops to CLECs at a reduced rate so that
the customer can get a dedicated connection between their office and the CLECs' network.
If the FCC decided to lift this requirement, this whole deck of cards could come down
in a hurry, and when it does, you can kiss dynamic integrated T1 service for under $500
good bye!
Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits.
|
If you would like to get a real-time 
