|
Courtesy of ShopforT1.com
Definition 1. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Brownfield T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Friday September 05, 2008,
02:52 am ET
Brownfield, Mississippi, Sep. 05 /Don Romburgh/ --
Business broadband, its price, and who can afford it, are changing. Every day an increasing number
of business are finding the new broadband services made available to them by the "new" telecommunications
companies that are emerging from the latest round of mergers and acquisitions. Overlapping networks
are being consolidated into bigger and leaner footprints, lowering the cost of dynamic integrated
digital signal 1 (DS1) service to the price range of about five regular phone lines. Small to medium
size business can now afford services once reserved for the Fortune 1000 companies.
"Commercial telecommunication providers were never on my Christmas card list"
commented Jake Chang, a small business owner in Denver, Colorado. "Dealing with them
meant erroneous bills, long wait times when trying to reach customer service, and
taxes I could never understand. Now that we migrated to a dynamic integrated
T1, my phone lines and high speed internet are bundled into one line with super
reliability. Not to mention the fact that XO Communications, a CLEC, treats me
like they actually want my business - not like I'm a pain in the you-know-what."
Dynamic integrated T1s are a fairly new phenomenon. Unlike their analog
counterparts that can never deviate from their initial set up configurations,
dynamic T1s are able to convert voice phone calls into data packets and
them prioritize their delivery through an all-digital trunk. The ability
to break everything down into the lowest common denominator (digital)
allows the system to change on-the-fly to reclaim phone lines for high
speed Internet the second the phone call is terminated. An integrated T1 essentially
provides the end user the same service as one data T1 line and one
voice T1 line, for half the cost.
Prior to the advent of the "all digital" integrated T-1 in 2005, customers only had
one choice when it came to dedicated service: analog trunks (24 line bundles).
Not only where analog trunks expensive - the average cost ranging from $800 to
$1500 per month depending on the user's geographic proximity to the LECs point
of presence - they could not re-allocate unused voice channels to carry data.
Digital trunks, on the other hand, can reclaim voice lines not in use and put
them to work carrying high-speed data packets. That means users enjoy the full
1.5 Mbps of broadband when they are not on the phone.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
Expect innovation to continue on its upward spiral as the CLECs continue to expand
their footprints as well as their customer bases. Barring any funny stuff from the FCC,
the CLECs will be here to stay. Sorry Ma Bell. Change does not happen quickly in an industry as so heavily regulated as Telecommunications.
Recent industry consolidation has provided huge alternatives to the incumbents, who
are now under pressure to keep up with new technologies while charging better prices
to retain and attract new customer bases.
|