|
Courtesy of ShopforT1.com
Definition 1. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Hardwick T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Thursday September 04, 2008,
08:49 pm ET
Hardwick, Minnesota, Sep. 04 /Kim Mankaryous/ --
Business broadband, its price, and who can afford it, are changing. Every day an increasing number
of business are finding the new broadband services made available to them by the "new" telecommunications
companies that are emerging from the latest round of mergers and acquisitions. Overlapping networks
are being consolidated into bigger and leaner footprints, lowering the cost of dynamic integrated
digital signal 1 (DS1) service to the price range of about five regular phone lines. Small to medium
size business can now afford services once reserved for the Fortune 1000 companies.
When asked about his recent decision to replace his TDM channelized T1 with a
SIP-enabled dynamic T1, Robert Probst, small business owner in San Diego, explained
that "it was really an easy decision to make. My business was growing and I couldn't
afford the cost of more voice trunks. When I learned that it was possible to
have up to 16 voice lines, and a full data T1 of high speed Internet bandwidth,
all on the same line, for under $500 - I was sold. I ended up expanding the
telecom capability of my business, improving the quality of my Internet connection,
and saved money while doing it."
The Integrated T1 line has two general flavors; analog and, of course, digital.
The term "trunk" is synonymous with an integrated T1 line, representing 24
bundled DS0 (regular 64KB) channels. Digital trunks form the basis technology
for dynamic integrated lines, which are capable of transporting digitized
versions of voice traffic in addition to regular data packets. This ability
of digital trunks to function in the data realm allows it the ability to
dynamically allocate traffic according to the application, allowing priority
for voice traffic and "re-claiming" that bandwidth for data transfer when the
phone call is completed. This ensures that none of the capacity of the
T1 line is ever wasted.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
There are two basic "integrated" DS-1 configurations, analog and digital. The 24-line
bundle in which they come is termed a "trunk". The main difference between analog and
digital trunks is their flexibility. With digital trunks, voice lines not in use
can be dynamically reconfigured to carry data traffic, so they don't sit idle.
Analog trunks on the other hand can not change their function once configured
by the service provider. Data channels remain data channels and the same for
voice channels, even if there is no voice traffic.
Adoption of new technologies take time, and dynamic integrated T1 service is no
different. Since the telephone service is regarded more as a utility than anything,
business pay very little attention to changes in the industry. Significant price
reductions and incentive packages need to be placed on their doorstep by proactive
consultants and telecom salespeople in order to grab their attention. However, once
the new technology begins becoming commonplace in the industry, momentum builds
and soon the new products become standard. Businesses soon see themselves at a
disadvantage to their piers if they don't adapt and keep up.
Until deregulation allowed smaller, hungrier telecommunications companies the
ability to compete, the United States was stuck with technologies that were quickly
becoming out of date. Now that the Bells actually have to innovate to keep up with
the smaller CLECs, customer everywhere are reaping the benefits. Hopefully the CLECs can continue to push the boundaries of innovation and economics.
The only thing that can keep them from the promise land is the gatekeeper of competition:
the Federal Communications Commission, and the huge Bells (AT&T and Verizon - that's you)
who make it a point to spend more money lobbying in Washington DC than Exxon Mobile.
|
Welcome to our real-time 
