|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Glen Dean T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Friday May 23, 2008,
08:42 am ET
Glen Dean, Kentucky, May. 23 /Michael Johnson/ --
The way business connect to the digital universe is changing. More and more enterprises are
discovering the new broadband options made available to them through a series of cost cutting
measures by telecommunication providers. With the recent rush to consolidate, more and more
features are being crammed into the current service offerings, which continue to fall in price
bringing products like integrated T1 service into the price range of the vast majority of
small to medium-size businesses.
The old-school integrated T-1 was analog in nature, and came with 24 configurable
channels (called a trunk) which could be configured to carry either voice or data
traffic. The new "dynamic" trunks are all-digital and can change on-the-fly
to carry either data or voice traffic. This comes in handy when none of the voice
lines are in use - all channels can revert to carrying data traffic, giving the
end-use a full 1.5 MBPS of broadband. Each phone call requires only 64K of bandwidth,
so even a small handful of calls only slows down the data connection by a nominal
amount.
At $50 to $75 per month, the average small business telephone customer could expect to pay
up to $750 for just 10 regular phone lines, which come with only a standard set of features
such as Voicemail, Caller ID, and Three-way calling. From 2000 to 2005, the cost of a
dynamic integrated T1 line was well over $800, making it an unattractive option from a
pure cost point of view. However, that paradigm has changed with the introduction of
sub-$400/month price plans and features that make the old POTs lines look pre-historic.
"When we moved into our new location here in Los Angeles" commented John Baker, a
small business owner in San Diego, California, "we feared having to sign up for
commercial telephone and internet service. Until about a year ago, the services
being offered to us were TDM, which doesn't come cheap. Thankfully our Telarus
commercial telecom broker recommended that we give TelePacific a try, and we did.
One year later, we've never had an erroneous bill, our phone and data are all on
one single dynamic T1, and we can focus on what we do best - brokering mortgages."
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
The Kentucky area is one place in particular where the analog to digital
revolution is gaining traction. One business owner we interviewed about
his recent decision to become a digital convert, Peter Anderson, explained
that "my biggest hindrance was my ignorance. Had I known that there was
a solution that would allow me to increase the number of voice lines,
get a full T1 (1.5 MB) of high-speed Internet, all for less than I was paying
for my POTS/DSL configuration, I would have made the move a long time ago."
Many others like Mr. Anderson are coming to the same conclusion.
As the competitive local exchange carriers continue to compete by introducing new and
exciting products at prices most small businesses can afford, they are coming up against
increasing resistance from the RBOCs who are forces to lease their own copper lines
to these CLECs at reduced rates. This reality has the CLECs rushing to deploy their
own networks and fiber routes, but the FCC may ultimately relax the mandate - leaving
all of us wondering how long the party is going to last. With the help of super-CLECs like XO Communications, PAETEC, Nuvox, One Communications,
Cavalier Telephone, and TelePacific, small business owners everywhere now have access
to non-Bell service that is on par or better than those being offered by the former
Bells. Integrated T1s that do more and cost less have transformed into a solid beach
head for the newcomers.
|
If you would like to get a real-time 
