|
Courtesy of ShopforT1.com
Definition 1. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Louisville T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 2. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 3. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 4. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
|
Friday November 14, 2008,
01:20 pm ET
Louisville, Kansas, Nov. 14 /Kim Mankaryous/ --
The digital universe, and the way people connect to it, is changing. Small businesses, in
particular, are discovering new high-speed Internet and telecom options that are now
squarely within their budgets. Through a myriad of mergers and acquisitions, telecommunication
providers have greatly enhanced their integrated T1 products with features that businesses
can't live without, all while dropping the price to about half of what they were just
two years ago.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
Prior to the advent of the "all digital" integrated T-1 in 2005, customers only had
one choice when it came to dedicated service: analog trunks (24 line bundles).
Not only where analog trunks expensive - the average cost ranging from $800 to
$1500 per month depending on the user's geographic proximity to the LECs point
of presence - they could not re-allocate unused voice channels to carry data.
Digital trunks, on the other hand, can reclaim voice lines not in use and put
them to work carrying high-speed data packets. That means users enjoy the full
1.5 Mbps of broadband when they are not on the phone.
Is the era of the analog trunk, or bundle of 24 DS-0 (64 kbps) channels,
officially over? Possibly, thanks to the two-for-the-price-of-one features
of a dynamic integrated T1, which can function exactly like a pure 1.5 mbps
data T1 when no one is one the phone, and allocate required bandwidth
for voice traffic when a user initiates a phone call. Likewise, as soon
as the client terminates the voice session, the 64 KB is re-assigned back
to the digital universe. This switch-hitting capability provides all
of the feel and function of a data T1 and voice T1, for a fraction of the price.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
The old-school integrated T-1 was analog in nature, and came with 24 configurable
channels (called a trunk) which could be configured to carry either voice or data
traffic. The new "dynamic" trunks are all-digital and can change on-the-fly
to carry either data or voice traffic. This comes in handy when none of the voice
lines are in use - all channels can revert to carrying data traffic, giving the
end-use a full 1.5 MBPS of broadband. Each phone call requires only 64K of bandwidth,
so even a small handful of calls only slows down the data connection by a nominal
amount.
Hopefully the CLECs can continue to push the boundaries of innovation and economics.
The only thing that can keep them from the promise land is the gatekeeper of competition:
the Federal Communications Commission, and the huge Bells (AT&T and Verizon - that's you)
who make it a point to spend more money lobbying in Washington DC than Exxon Mobile. The golden age of telecommunications may be upon us, based upon our research and
recent uptick in customer satisfaction. Although the industry has years of
bad blood to overcome, recent innovations such as the dynamically configuring
T1 line are proof that progress is indeed being made.
|