|
Courtesy of ShopforT1.com
Definition 1. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Kellogg T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
Definition 4. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
|
Friday July 18, 2008,
04:38 pm ET
Kellogg, Iowa, Jul. 18 /Daniel Johannesburg/ --
Higher productivity for small to medium sized businesses is just around the corner thanks
to commercial grade broadband services that are now being delivered at a fraction of their
previous cost. Due to the ever increasing competitive marketplace and a mad dash to consolidate
networks, telecoms are offering their premium business services to small businesses for a fraction
of what they used to cost just a few years ago. Businesses who use more than four regular phone
lines can now upgrade to dynamic integrated T-carrier circuits for the same price.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
When asked about his recent decision to replace his TDM channelized T1 with a
SIP-enabled dynamic T1, Robert Probst, small business owner in San Diego, explained
that "it was really an easy decision to make. My business was growing and I couldn't
afford the cost of more voice trunks. When I learned that it was possible to
have up to 16 voice lines, and a full data T1 of high speed Internet bandwidth,
all on the same line, for under $500 - I was sold. I ended up expanding the
telecom capability of my business, improving the quality of my Internet connection,
and saved money while doing it."
"What we're seeing here is the Bells holding their prices steady and milking their high
margins on POTS (plain old telephone service) lines for as long as possible. With the
lower prices being offered by CLECs (Competitive Local Exchange Carriers) on dynamic
integrated T-carrier services, the Bells are scrambling to keep pace before enterprises
realize they can actually save money by upgrading to bigger and more reliable circuits."
commented Don Rosebush, industry expert.
Dynamic integrated T1s are a fairly new phenomenon. Unlike their analog
counterparts that can never deviate from their initial set up configurations,
dynamic T1s are able to convert voice phone calls into data packets and
them prioritize their delivery through an all-digital trunk. The ability
to break everything down into the lowest common denominator (digital)
allows the system to change on-the-fly to reclaim phone lines for high
speed Internet the second the phone call is terminated. An integrated T1 essentially
provides the end user the same service as one data T1 line and one
voice T1 line, for half the cost.
At $50 to $75 per month, the average small business telephone customer could expect to pay
up to $750 for just 10 regular phone lines, which come with only a standard set of features
such as Voicemail, Caller ID, and Three-way calling. From 2000 to 2005, the cost of a
dynamic integrated T1 line was well over $800, making it an unattractive option from a
pure cost point of view. However, that paradigm has changed with the introduction of
sub-$400/month price plans and features that make the old POTs lines look pre-historic.
The recent progress made by CLECs leaves us thinking in hypotheticals. "What if the
Clinton administration wouldn't have passed the Telecommunications Act of 1996, requiring
RBOCs to lease their lines at reduces rates to the CLECs?" "Will the FCC continue to
enforce this law, or will it be overturned by the powerful AT&T and Verizon lobbyists?"
It is impossible to know either way, but for the time being we can just be grateful
that the industry has evolved to the point were small businesses can actually benefit
from telecommunications at an affordable rate. Recent advances in technology, fostered by competition from growing CLECs, is bringing
integrated T1 services to small business everywhere. And the trend doesn't look like
it will change anytime soon. CLECs continue to grow their networks, offering more
advanced services like metro ethernet, MPLS, and more.
|