|
Courtesy of ShopforT1.com
Definition 1. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Yulee T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Wednesday August 20, 2008,
05:19 am ET
Yulee, Florida, Aug. 20 /Zackary Smith/ --
Business broadband, its price, and who can afford it, are changing. Every day an increasing number
of business are finding the new broadband services made available to them by the "new" telecommunications
companies that are emerging from the latest round of mergers and acquisitions. Overlapping networks
are being consolidated into bigger and leaner footprints, lowering the cost of dynamic integrated
digital signal 1 (DS1) service to the price range of about five regular phone lines. Small to medium
size business can now afford services once reserved for the Fortune 1000 companies.
Adoption of new technologies take time, and dynamic integrated T1 service is no
different. Since the telephone service is regarded more as a utility than anything,
business pay very little attention to changes in the industry. Significant price
reductions and incentive packages need to be placed on their doorstep by proactive
consultants and telecom salespeople in order to grab their attention. However, once
the new technology begins becoming commonplace in the industry, momentum builds
and soon the new products become standard. Businesses soon see themselves at a
disadvantage to their piers if they don't adapt and keep up.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
"The marriage of lower price points and feature-rich T-1 services have made it so that
customers can now get more bang for less buck" observed Kent Stallions, telecom expert
at PK Communications. "The good old days of the Bells charging people $50/month for
regular POTs lines without them having another alternative are over. With the advent
of sub-$450 dynamic integrated T1 service, businesses are able to get up to 1.5 Mbps
of Internet connectivity and 24 phone lines all in one package, for less than what they
pay now for 5 regular phone lines" Stallions continued.
There are two basic "integrated" DS-1 configurations, analog and digital. The 24-line
bundle in which they come is termed a "trunk". The main difference between analog and
digital trunks is their flexibility. With digital trunks, voice lines not in use
can be dynamically reconfigured to carry data traffic, so they don't sit idle.
Analog trunks on the other hand can not change their function once configured
by the service provider. Data channels remain data channels and the same for
voice channels, even if there is no voice traffic.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
Will this train of innovation, lower prices, and services that add value to SMB's continue
to roll down the tracks of progress? It's all up to our government - and which political
party controls the FCC. Without the deregulation act of 1996, we would have never known
just how much the CLECs were capable of. Recent advances in technology, fostered by competition from growing CLECs, is bringing
integrated T1 services to small business everywhere. And the trend doesn't look like
it will change anytime soon. CLECs continue to grow their networks, offering more
advanced services like metro ethernet, MPLS, and more.
|