|
Courtesy of ShopforT1.com
Definition 1. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the West Village T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 2. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 3. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
Monday September 29, 2008,
12:56 am ET
West Village, Colorado, Sep. 29 /Don Romburgh/ --
The digital universe, and the way people connect to it, is changing. Small businesses, in
particular, are discovering new high-speed Internet and telecom options that are now
squarely within their budgets. Through a myriad of mergers and acquisitions, telecommunication
providers have greatly enhanced their integrated T1 products with features that businesses
can't live without, all while dropping the price to about half of what they were just
two years ago.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
The Integrated T1 line has two general flavors; analog and, of course, digital.
The term "trunk" is synonymous with an integrated T1 line, representing 24
bundled DS0 (regular 64KB) channels. Digital trunks form the basis technology
for dynamic integrated lines, which are capable of transporting digitized
versions of voice traffic in addition to regular data packets. This ability
of digital trunks to function in the data realm allows it the ability to
dynamically allocate traffic according to the application, allowing priority
for voice traffic and "re-claiming" that bandwidth for data transfer when the
phone call is completed. This ensures that none of the capacity of the
T1 line is ever wasted.
The old-school integrated T-1 was analog in nature, and came with 24 configurable
channels (called a trunk) which could be configured to carry either voice or data
traffic. The new "dynamic" trunks are all-digital and can change on-the-fly
to carry either data or voice traffic. This comes in handy when none of the voice
lines are in use - all channels can revert to carrying data traffic, giving the
end-use a full 1.5 MBPS of broadband. Each phone call requires only 64K of bandwidth,
so even a small handful of calls only slows down the data connection by a nominal
amount.
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
To illustrate the types of decisions that small business owners are faced with
on a daily basis, we interviewed Glenda Probst, small business owner in Los
Angeles, California, about her recent move to a dynamic integrated T-1.
"I was in a quandary about how to go about expanding the number of voice
lines to my business. Before making the move to a dynamic integrated line,
I was using POTs lines. After the fifth line, my bill was above $300/month,
not including my $100/month DSL connection. Now, I have 12 pure digital
voice lines, 1.5 MB of broadband, and I pay under $400 for it. It was a major
upgrade in service with a reduction in total price. I only wish I'd learned
about this product sooner."
Change does not happen quickly in an industry as so heavily regulated as Telecommunications.
Recent industry consolidation has provided huge alternatives to the incumbents, who
are now under pressure to keep up with new technologies while charging better prices
to retain and attract new customer bases. But how much longer will we continue to see improved technology, services, and prices?
It's all in the hands of the Federal Communications Commission, as they have the power
to sqwash the CLECs by proxy. No wonder AT&T and Verizon are the two biggest lobbying
powers in Washington. It makes you wonder what kind of services they would be able to
offer had they plowed that money into R&D instead of politics.
|
Welcome to our real-time 
