Friday August 08, 2008,
12:45 am ET
Antioch, California, Aug. 08 /Jerome Jones/ --
The way business connect to the digital universe is changing. More and more enterprises are
discovering the new broadband options made available to them through a series of cost cutting
measures by telecommunication providers. With the recent rush to consolidate, more and more
features are being crammed into the current service offerings, which continue to fall in price
bringing products like integrated T1 service into the price range of the vast majority of
small to medium-size businesses.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
With any new advancement in technology there is usually a lag in the time it take
users known as "early adapters" to try out and begin using the new services themselves.
Although dynamic T1 service has been available in many US markets since 2005, it's
just now that we have observed people beginning to embrace the new technology. One
such business that recently changed from a voice PRI and data T1 line on to one,
dynamic T1 line is Jason Oliver, a small business owner in Los Angeles, California.
"When I found out that I could replace my two T1's with one single dynamic integrated
circuit (offered by TelePacific Communications), I had two thoughts: 1- where do I
sign, and 2- why didn't someone tell me about this sooner!"
To see how customers are reacting to this new product, we interviewed a series of
small business owners in California who are currently using the service. One such
individual shared with us his enthusiasm for the enhanced capabilities dynamic
service offers. "When I was first contacted about the dynamic integrated T1,
I was deeply skeptical of what I was hearing. Over the course of my brief
dealings with telephone companies, all I got was less service with more cost.
Now I am happy to say that I am getting more for less, which makes for one
very happy customer."
When asked about his recent decision to replace his TDM channelized T1 with a
SIP-enabled dynamic T1, Robert Probst, small business owner in San Diego, explained
that "it was really an easy decision to make. My business was growing and I couldn't
afford the cost of more voice trunks. When I learned that it was possible to
have up to 16 voice lines, and a full data T1 of high speed Internet bandwidth,
all on the same line, for under $500 - I was sold. I ended up expanding the
telecom capability of my business, improving the quality of my Internet connection,
and saved money while doing it."
The two basic Integrated T1 line configurations, as they exist in today's
market, are analog and digital. Commonly referred to as "trunks", these 24-channel
bundles transmit TDM signals directly to the service provider's network via a
local loop. Unlike analog trunks, whose configuration can not change once the
channels have been allocated, digital "dynamic" lines can change reconfigure
themselves from data, to voice, and back again. This ability to reclaim voice
channels for data broadband access when not in use gives the user the performance
of two T1's in one.
Looking in the crystal ball of the future, it is clear that new an innovated services
being offered by the few super-CLECs remaining will drive innovation higher and prices
lower. New technology is being pressed to the forefront by lower prices that the mainstream
of small businesses everywhere can comfortably afford. As the competitive local exchange carriers continue to compete by introducing new and
exciting products at prices most small businesses can afford, they are coming up against
increasing resistance from the RBOCs who are forces to lease their own copper lines
to these CLECs at reduced rates. This reality has the CLECs rushing to deploy their
own networks and fiber routes, but the FCC may ultimately relax the mandate - leaving
all of us wondering how long the party is going to last.
|
|
Courtesy of ShopforT1.com
Definition 1. -
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
Definition 2. -
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
Definition 3. -
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the Antioch T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
Definition 4. -
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
|
If you would like to get a real-time 
