Tuesday December 16, 2008,
02:59 pm ET
Escambia County, Alabama, Dec. 16 /Olamide Lieberman/ --
The way business connect to the digital universe is changing. More and more enterprises are
discovering the new broadband options made available to them through a series of cost cutting
measures by telecommunication providers. With the recent rush to consolidate, more and more
features are being crammed into the current service offerings, which continue to fall in price
bringing products like integrated T1 service into the price range of the vast majority of
small to medium-size businesses.
Integrated T1s comes in two basic configurations: digital and analog trunks, with a trunk
being a 24-line (or channel) bundle. The newer, digital trunks, however, are able to
run both voice and data over the same channels. By assigning priority to the voice
traffic whenever it is present, a dynamic integrated trunk can provide the end-user
with a full 1.5 MBPS of data throughput if no phone calls are in progress. As more
voice lines are required, less data lines are available. Analog trunks are all
pre-assigned to either voice or data traffic, and do not reconfigure in the event
there is no voice traffic.
"When we moved into our new location here in Los Angeles" commented John Baker, a
small business owner in San Diego, California, "we feared having to sign up for
commercial telephone and internet service. Until about a year ago, the services
being offered to us were TDM, which doesn't come cheap. Thankfully our Telarus
commercial telecom broker recommended that we give TelePacific a try, and we did.
One year later, we've never had an erroneous bill, our phone and data are all on
one single dynamic T1, and we can focus on what we do best - brokering mortgages."
With any new advancement in technology there is usually a lag in the time it take
users known as "early adapters" to try out and begin using the new services themselves.
Although dynamic T1 service has been available in many US markets since 2005, it's
just now that we have observed people beginning to embrace the new technology. One
such business that recently changed from a voice PRI and data T1 line on to one,
dynamic T1 line is Jason Oliver, a small business owner in Los Angeles, California.
"When I found out that I could replace my two T1's with one single dynamic integrated
circuit (offered by TelePacific Communications), I had two thoughts: 1- where do I
sign, and 2- why didn't someone tell me about this sooner!"
From 1997 to 2007, the average cost of a POTS (plain old telephone service) line from the
Bells has hovered in the $50 - $80 per month price range. During this same time period,
integrated DS1 (digital signal 1) lines - which is the equivalent of 24 standard lines -
have come down in price from $1000 per month to $400. Small to medium size businesses
who have more than 5 phone lines can now actually save money by upgrading their service.
The old-school integrated T-1 was analog in nature, and came with 24 configurable
channels (called a trunk) which could be configured to carry either voice or data
traffic. The new "dynamic" trunks are all-digital and can change on-the-fly
to carry either data or voice traffic. This comes in handy when none of the voice
lines are in use - all channels can revert to carrying data traffic, giving the
end-use a full 1.5 MBPS of broadband. Each phone call requires only 64K of bandwidth,
so even a small handful of calls only slows down the data connection by a nominal
amount.
The only thing that can get in the way of future progress is the law. You know, the one
that requires the RBOCs to lease their local loops to CLECs at a reduced rate so that
the customer can get a dedicated connection between their office and the CLECs' network.
If the FCC decided to lift this requirement, this whole deck of cards could come down
in a hurry, and when it does, you can kiss dynamic integrated T1 service for under $500
good bye!
Once a forgotten segment of the business telecommunication landscape, small to medium
size businesses are finally being serviced with products (like the dynamic integrated
T1 line) at prices they can afford. Gone are the days when the Bells can shove TDM
services down the collective throats of SMB's at prices that resemble a mortgage rather
than a telephone service.
|
|
Courtesy of ShopforT1.com
The T-carrier system, introduced by the Bell system in the US in the 1960's, was the first successful system that supported digitalised voice transmission. The original transmission rate (1.544 Mbps) in the T1 line is in common use today in ISP (Internet Service Provider) connections to the Internet
A type of high speed Internet connection that provides a great deal of bandwidth. Many businesses lease T1 lines to connect to the Internet, but because they are expensive and offer more bandwidth than most small businesses and homes need, they are not realistic solutions for small and low-demand Internet users.
A high-speed digital connection capable of transmitting data at a rate of approximately 1.5 million bits per second. A T1 line is typically used by small and medium-sized companies with heavy network traffic. It is large enough to send and receive very large text files, graphics, sounds, and databases instantaneously, and is the fastest speed commonly used to connect networks to the Internet. Sometimes referred to as a leased line, a T1 is basically too large and too expensive for individual home use.
The T1 (or T-1) carrier is the most commonly used digital line in the United States, Canada, and Japan. In these countries, it carries 24 pulse code modulation (PCM) signals using time-division multiplexing (TDM) at an overall rate of 1.544 million bits per second (Mbps). T1 lines use copper wire and span distances within and between major metropolitan areas. A T1 Outstate System has been developed for longer distances between cities.
|
If you would like to get a real-time 
